Agricultural Spraying
Drift-controlled field and orchard spraying, boom and backpack.
CAPABILITIES
What We Hold for Agricultural Spraying
Drift control
ASABE Fine → Ultra Coarse classes
Flow
ISO 01–08 (0.39–3.15 L/min @ 3 bar)
Wear parts
Ceramic tips
Mounting
Bayonet / 8 mm AF
Materials
Ceramic / SS 303 / SS 316
Response
Boom sizing within one business day
SOLUTION MATRIX
Duties, Nozzles and Parameters We Cover
| Duty | Solution | Parameters | Notes |
|---|---|---|---|
| Pre-emergence herbicide | AG-08 flat fan | 3.15 L/min @ 3 bar (ISO 08) | Coarse, anti-drift |
| Boundary / drift-sensitive | AG-DUAL air-induction | 1.19–3.15 L/min (ISO 03–08) | Very coarse C–XC, 80–95% drift cut |
| Contact herbicide | AG-04 flat fan | 1.58 L/min @ 3 bar (ISO 04) | Medium, good coverage |
| Fungicide / insecticide canopy | AG-C110 hollow cone | 0.39–1.58 L/min (ISO 01–04) | Fine, penetrates canopy |
| Foliar fertilizer | AG-C150 full cone | 1.19–3.15 L/min (ISO 03–08) | Medium, even distribution |
| Low-volume backpack spot spray | AG-02 flat fan | 0.79 L/min @ 3 bar (ISO 02) | Fine, precise |
CHALLENGES WE SOLVE
Where Agricultural Spraying Programs Usually Struggle
Herbicide drift damages neighbours
Our Solution
Air-induction tips: 80–95% driftable-fines cut, Very Coarse class, same flow.
Fungicide never reaches the canopy
Our Solution
Hollow cone Fine-class tips that penetrate foliage.
Ceramic tips wear unevenly
Our Solution
ISO-size marked tips, replacement matched to flow class.
Boom flow mismatch at field pressure
Our Solution
Flow math (L/min = L/ha × km/h × spacing ÷ 600) sized to your boom.
MATERIALS
Materials We Supply for This Duty
Ceramic
Standard wear-resistance for abrasive sprays
SS 303 / 316
Full cone and corrosion duty
CAPABILITY & SUPPORT
What Your Program Gets with BoreJet
We work with Crop farmers, Spray contractors, Orchard and vineyard, Greenhouse growers, with sizing from your numbers, configuration support, samples before the batch, and OEM to drawing.
Send your crop, spray program and boom specs.
Our engineers reply with tip size, pressure window and drift class, usually within one business day.