Cooling & Humidification
Evaporative cooling and fogging for mills, greenhouses and process air.
CAPABILITIES
What We Hold for Cooling & Humidification
Droplet control
10–100 µm (misting) / coarse impingement
Pressure range
1–70 bar hydraulic; 1–6 bar air
Evaporative load
1 L/h water ≈ 628 W cooling
Materials
SS 303/316, PP, ceramic inserts
OEM
Built to drawing or sample
Response
Heat-load sizing within one business day
SOLUTION MATRIX
Duties, Nozzles and Parameters We Cover
| Duty | Solution | Parameters | Notes |
|---|---|---|---|
| Factory floor cooling | MS high-pressure misting | 0.05–0.8 L/min @ 70 bar | 10–60 µm evaporates fully |
| Greenhouse humidification | MS-010/MS-020 misting | 0.09–0.3 L/min @ 70 bar | Humidity control without wetting |
| Data centre pre-cooling | MS misting / AA-US ultrasonic | Fine droplet, staged control | Adiabatic pre-cooling, COP gain |
| Process gas cooling | Hollow cone hydraulic | High flow @ 3–7 bar | Evaporative quench |
| Textile / print humidification | AA air-assisted | 0.5–120 L/h @ 2 bar air | Fine, controllable mist |
| Outdoor patio cooling | MS-CER ceramic mist | 0.02–0.05 L/min @ 70 bar | 3–20 µm dry fog |
CHALLENGES WE SOLVE
Where Cooling & Humidification Programs Usually Struggle
Mist rains on the floor instead of evaporating
Our Solution
Droplet band matched to evaporation time. 10–60 µm evaporates before it lands.
Humidity swings ruin the product
Our Solution
Fine-mist systems with staged control for repeatable RH.
Energy bill from compressed air
Our Solution
Hydraulic high-pressure misting where air cost matters: pump energy only.
Nozzles clog on hard water
Our Solution
Ceramic inserts and filtration guidance sized to your water.
MATERIALS
Materials We Supply for This Duty
SS 303 / 316
Standard misting duty, high-pressure
Ceramic insert
Wear resistance and finest droplets
PP
Low-pressure decorative misting
CAPABILITY & SUPPORT
What Your Program Gets with BoreJet
We work with Factories and workshops, Greenhouses and nurseries, Data centres, Outdoor hospitality, with sizing from your numbers, configuration support, samples before the batch, and OEM to drawing.
Send your space dimensions and heat load.
Our engineers reply with nozzle count, layout and droplet spec, usually within one business day.