Dust Suppression
Wide-angle mist for conveyors, demolition and material handling.
CAPABILITIES
What We Hold for Dust Suppression
Droplet band
300–1,000 µm (capture-optimised)
Coverage
Wide-angle full cone to 120°+
Flow
1.5–265 L/min per nozzle
Clog resistance
Spiral free passage to 19.5 mm
Materials
316L / PP / PVDF
Response
Layout sizing within one business day
SOLUTION MATRIX
Duties, Nozzles and Parameters We Cover
| Duty | Solution | Parameters | Notes |
|---|---|---|---|
| Stockpile wetting | SP-3/4 / SP-1 spiral full cone | 110–265 L/min @ 1.5 bar | Coarse drops, no drift |
| Crusher discharge | SP-3/8 spiral | 12–46 L/min @ 1.5 bar | Anti-clog for dirty water |
| Conveyor transfer points | SP-1/4 spiral + wide-angle fan | 4–11 L/min @ 1.5 bar | Targeted suppression |
| Demolition / excavation | SP-1/2 spiral | 65–95 L/min @ 1.5 bar | High volume, long reach |
| Recycled water duty | SP-3/8 spiral (open path) | 12–46 L/min | Largest free passage per size |
| Indoor dust points | Fine mist + full cone mix | 1.5–12 L/min @ 3 bar | Suppression without wet floors |
CHALLENGES WE SOLVE
Where Dust Suppression Programs Usually Struggle
Fine mist evaporates before reaching the dust
Our Solution
300–1,000 µm capture-optimised drops that wet particles and fall with them.
Dirty recycled water plugs nozzles
Our Solution
One-piece spiral with up to 19.5 mm free passage: nothing narrow inside.
Suppression line keeps failing on scale
Our Solution
Open-path spirals plus filtration guidance for the water quality you actually have.
Coverage gaps between guns
Our Solution
Layout sized on spray angle and standoff with overlap, not guesswork.
MATERIALS
Materials We Supply for This Duty
316L
Standard dust suppression duty
PP / PVDF
Corrosive or cost-sensitive duty
CAPABILITY & SUPPORT
What Your Program Gets with BoreJet
We work with Quarries and crushers, Material handling plants, Demolition contractors, Waste and recycling, with sizing from your numbers, configuration support, samples before the batch, and OEM to drawing.
Send your site layout and water source.
Our engineers reply with gun count, nozzle size and placement, usually within one business day.